OPERATIONAL CAPACITY & CAPABILITY MPT has gone to great extent to assemble under one roof all the requirements needed for Plasma/Ion-Nitriding operation. The Benefits of the dual vessel system adopted by MPT is improved productivity, and lower labor content, which is passed on to our customer in lowering cost. The additional benefit of this system is a rapid turn around time, maximum of five (5) working days. This period of turn around time includes a full documentation of (1) receiving inspection, (2) cleaning, (3) documented process parameters, (4) loading documentation, (5) Ion-Nitride processing, (6) resulting metallurgical laboratory evaluation and analysis. The complete documentation will remain at MPT for 10 years, and is available for customers review at any time during that period. (picture) MATERIAL The information listed in the following tables are actual results of present actual documents processing. This information is available for the customer’s review upon request. Materials Stainless Steel Alloy Surface hardness (min.) Case depth (min.) 316 60.0HRC .005 410 65.0HRC .005 420 65.0HRC .005 440C 65.0HRC .005 13-8PH 65.0HRC .003 15-5PH 60.0HRC .003 17-4PH 60.0HRC .003 A286 60.0HRC .003 Alloy Steel Alloy Surface Hardness (min.) Case depth (min.) 4130 55.0HRC .005 4140 57.0HRC .005 4340 55.0HRC .005 8620 55.0HRC .005 Nak-55 55.0HRC .005 Nitralloy 65.0HRC .005 Nitralloy-135 65.0HRC .005 CA6NM 60.0HRC .005 Nickel-based Alloy Alloy Surface hardness (min.) Case depth (min.) Maraging 250 60.0HRC .002 Maraging 300 60.0HRC .002 Maraging 350 63.0HRC .002 Inco 718 65.0HRC .0001 Tool Steel Alloy Surface hardness (min.) Case depth (min.) A2 65.0HRC .005 D2 65.0HRC .005 H-11 65.0HRC .005 H-13 65.0HRC .005 P-20 65.0HRC .005 Cast Iron Alloy Surface hardness (min.) Case depth (min.) All Cast Fes 45.0HRC .001 Titanium Alloy Surface hardness (min.) Case depth (min.) 6-4 70.0HRC .0005 10-2-3 70.0HRC .0005 Beta Alloys 70.0HRC .0005